User Manual Tafee Bowle 2

The Tafee Bowle 2 is a home on-demand convection vaporizer disguised in a body that looks like a drinking glass. This page is the complete user manual for Tafee Bowle 2, prepared by VapeFully as part of our user manuals library: from unlocking the device after transport, through inhalation technique, to cleaning and the most common problems. One thing before you start: this model must never be burned off empty.

What’s in the box

The kit contains the Bowle base with the drinking vessel, a mouthpiece, the Potter grinder, ceramic herb capsules, a stirring tool and a USB charger with cable. If any element is missing from the box, write to us at help@vapefully.com.

The mouthpiece, grinder, capsules and stirring tool are not supplied sterile. Before first use, rinse them in warm water and dry them thoroughly.

First use

1. Charge the battery fully. Charging can take up to several hours. A full battery is indicated by 5 blue LEDs above the USB-C port.
2. Unlock the device. The Bowle 2 leaves the factory locked for transport. Quickly press the large button (the upper one) 3 times in a row.
3. Rinse the accessories. Wash the mouthpiece, grinder, capsules and stirring tool in warm water and dry them.

Important: the Tafee Bowle 2 must never be burned off empty. Running the heating system without inhaling risks damaging it and voids the warranty. So you skip the classic burn-off known from other vaporizers.

Step-by-step operation

1. Pack the chamber. Grind your herb to a medium-fine consistency and fill the chamber without pressing the herb down at all.
2. Fit the mouthpiece. Place the mouthpiece with the chamber onto the main unit.
3. Choose the temperature. Press the smaller, lower button: the more dots light up, the higher the temperature. The top setting is 260°C.
4. Heat and inhale straight away. Press the large button and begin your draw immediately. The heater only runs during inhalation, and switching it on without drawing risks damaging the device.
5. Keep a rhythm. Draws should last about 6 seconds. Start on a low setting and raise it every 2-3 draws to maximise vapour production.

The Bowle 2 also handles concentrates: form a small ball of cleaned hemp fibre with concentrate inside and place it in the chamber of the glass mouthpiece.

Look after the battery: charge the device when the indicator shows 25%, and never run it down to zero. Use the charger and cable from the kit.

Cleaning and maintenance

• Take the device apart: separate the mouthpiece from the base by pulling it backwards, then remove the chamber, the mouthpiece tip and all the gaskets.
• Soak the ceramic chamber (together with the metal screen) and the mouthpiece in isopropyl alcohol.
• Rinse all the parts under warm running water and dry them thoroughly before reassembly.
• Never burn the device off after cleaning. Alcohol residue must evaporate on its own, so only reassemble parts once they are completely dry.

Most common problems (Tafee Bowle 2)

A new device does not respond to the button

That is not a fault, just transport mode. Quickly press the large button 3 times in a row to unlock the device, and make sure the battery is charged.

It does not charge

The Bowle 2 is fussy about power: use the charger and cable supplied by the manufacturer, because other chargers, especially more powerful ones, often refuse to work with it. Charging a full battery takes up to several hours, so give it time. If the LEDs do not respond even with the official kit, submit a warranty claim.

The body and mouthpiece get very warm

During long, intense sessions this is normal. Take breaks and let the device rest before you start another round. Do not touch the ceramic capsule right after a session, because its surface holds heat for a long time.

Little vapour

Check three things: whether you start drawing the moment you press the large button (the heater only works during inhalation), whether the herb is packed too tight, and whether the chamber and screen are clean. If all of that checks out, raise the temperature setting by one dot.

Warranty

Warranty claims for the Tafee Bowle 2 go through VapeFully: the shop is liable for the device for 24 months from purchase, and we process claims within 14 days. Repairs are carried out exclusively by the manufacturer Tafee’s service centre, so do not take the base apart yourself. Remember that modifying the device or running the heater without inhaling means losing the warranty. You can also return an unused device within 30 days. Details and the claim form are on the Returns and complaints page.

The Tafee Bowle 2 is intended solely for dry plant material and only for adults. Keep the device, grinder and power adapter out of reach of children and animals, and do not touch heated ceramic parts until they have cooled down.