The Arizer Go SRT is an advanced portable vaporizer for inhaling herbs and dried plant material, designed in Canada by Arizer – a brand with many years of experience in the vaporization industry. Beneath the compact aluminium housing with a matte finish hides a hybrid ceramic heater that reaches the set temperature in 5 to 15 seconds. The entire vapour path is made of borosilicate glass – no plastic comes into contact with the vapour at any stage. The 21700 battery is replaceable using basic tools, and the modular Go Shell design means the device is ready for a session whenever you need it.
Arizer Go SRT vaporizer – hybrid heating system with convection bias
At the heart of the Go SRT is a ceramic heater working in a hybrid setup: 75% is convection, that is hot air passing through the herbs, and 25% is conduction – heat given off by the heated chamber walls. This combination ensures even extraction of the material throughout the chamber without the need to stir it during the session.
The SRT (Smart Rapid Technology) system maintains a stable temperature throughout the entire session, and the real-time display tracks three phases: heat-up, the active session and residual heat after it ends – so you always know when to draw and how much time is left. The temperature range covers 50°C-220°C with adjustment in 1°C steps.
The Arizer Go SRT vaporizer has a fully glass vapour path – clean flavour with no compromises
As in all portable Arizer models, the vapour path in the Go SRT is made entirely of borosilicate glass – from the heating chamber all the way to the mouthpiece. No plastic comes into contact with the vapour at any stage of inhalation. Borosilicate glass is resistant to high temperatures, chemically inert and does not affect flavour, so the natural aroma of the herbs is clearly noticeable during every session.
Two glass configurations are available: Go Shell capsules with the Go mouthpiece (free airflow, compact format) or a classic glass mouthpiece integrated with the dried herb chamber. Both options use the same fully glass vapour path – they differ only in the convenience of preparing a session.
The Arizer Go SRT vaporizer supports the Go Shell capsule system – prepare your session in advance
Go Shell is Arizer’s first dosing capsule and one of the key innovations in the Arizer Go SRT. Each capsule is a small glass container with a screen, holding up to 0.3 g of herbs (optimally around 0.2 g for the best airflow). You fill the capsule by sliding it into a container of ground dried herbs or by pouring the material in by hand. Silicone caps on both sides seal the contents tightly and eliminate odour during transport.
Thanks to the Go Shell system, you can prepare several capsules at home and swap them within a few seconds – without having to carry herbs with you and pack the device on the spot. The system can be expanded with a transport case for 10 capsules, a filling case with a tray for 6 capsules at once, and the Arizer grinder, which grinds material straight into the capsules.
The Arizer Go SRT vaporizer lets you vaporize in as many as 4 ways – match the session to your own preferences
The Go SRT supports four configurations of glass elements:
- Go Shell + Go mouthpiece – the most compact set with wide airflow. Best for quick sessions away from home.
- Integrated glass mouthpiece – the classic Arizer method. Herbs are loaded directly into the bowl-shaped tip of the mouthpiece, with no need to use capsules.
- Go Shell + water adapter (14.5 mm) – connects the Arizer Go SRT to any water pipe or bubbler with a 14.5 mm joint. The adapter is included in the set.
- Integrated glass water adapter (14.5 mm) – a single-piece glass water adapter integrated with the dried herb chamber, fitting directly to a water pipe. Sold separately.
The Arizer Go SRT is also compatible with all previous glass accessories from the Arizer ArGo.
Arizer Go SRT vaporizer – extensive session personalisation options
The SRT interface offers three fully editable presets – each storing its own temperature and session time (from 20 seconds to 5 minutes), which lets you configure different profiles for different herbs or situations. Switching between presets is done with the UP and DOWN buttons in standby mode, without digging into menus.
Session Toggle enables an instant view of the battery level, the time until automatic shut-off, or extending the active session. The advanced settings let you adjust audio signals, vibration notifications and display parameters. When you flip the device over for use with a water pipe, the screen and controls automatically rotate – no upside-down controls, no unreadable indicators.
Efficient power system – charging and use without interruptions
The Arizer Go SRT is powered by a 21700 lithium-ion battery with a 5000 mAh capacity, enough for about 10-12 sessions (around 50-60 minutes of continuous use) on a single charge. Charging via USB-C takes about two hours to full, and a 15-minute top-up adds around 20% of capacity.
The pass-through function lets you use the vaporizer while charging – a low battery does not mean a forced break in your session. The eco-charging mode, active by default, limits charging to 80%, extending the cell’s lifespan. A full charge to 100% can be forced by holding the UP button while connected to the charger.
The battery is replaceable using basic tools – the Arizer Go SRT is designed for years of use, well beyond the natural life cycle of a single cell.
Arizer Go SRT vaporizer – modular and compact construction
The Arizer Go SRT measures 11 × 6 × 3 cm and weighs about 240 g with the mouthpiece and cap – it easily fits in a jacket or jeans pocket. The aluminium housing with a matte finish sits securely in the hand. The glass mouthpiece is hidden inside the housing and protected by a magnetic silicone cap that uses magnets to seal the opening tightly when the device is not in use. The cap can be conveniently attached magnetically to the bottom of the vaporizer during a session.
The heating chamber lid lifts magnetically, providing quick access. Go Shell capsules are inserted using a silicone holder – swapping between sessions takes a few seconds.
Arizer Go SRT vaporizer – exceptionally simple maintenance
Arizer portable vaporizers are renowned for being exceptionally easy to keep clean, and the Arizer Go SRT continues this tradition. Simply flip the device over and wipe the chamber with a cotton swab soaked in isopropyl alcohol (e.g. VapeCleaner). The glass elements and screens should be soaked in isopropyl alcohol, rinsed with hot water and dried thoroughly before the next session.
Rotating several Go Shell capsules between sessions helps keep them clean for longer. A medium grind and a loose fill help maintain screen airflow. If draws become harder, the capsule screen is usually the first element to check.
Who will the Arizer Go SRT vaporizer be a good choice for?
The Arizer Go SRT is an ideal choice for users who:
- value clean vapour flavour in a compact device;
- want to prepare sessions in advance thanks to the dosing capsule system;
- need a device ready to use in 5 to 15 seconds;
- plan to use a water filter (14.5 mm adapter included);
- are looking for a vaporizer with a replaceable battery that offers long-term reliability;
- expect simple everyday gear with advanced session control;
- want to use a wide temperature range (from 50 to 220°C).
(4.7/5)