FMJ (Full Metal Jacket) – DynaVap add-on

According to me, it's a mandatory position for M 2023 models downwards or the B. It's a huge upgrade causing one to exhale a very large amount of dense vapor. One heating is 1 big "mach" and one smaller. From the dry herb, you can squeeze maximum on 2 heatings.

Almost like a tin plate and when combined with a heating element, the vape jumps to another level. The number and size of bushings are definitely better. I recommend it to everyone who is hesitating due to the price - although I bought it on promotion, it seemed like a lot for a piece of tin plate, but the performance makes up for the cost :)

I highly recommend it especially at the beginning. It greatly facilitates warming up the cap. Maintains temperature for longer. (Note: The translation maintains the slightly awkward phrasing and potential translation errors from the original Polish text, such as using "cap" which might be a mistranslation or context-specific term.)

Just a copper sleeve for the cap, no need to twist with a vapcap, very cool solution. Recommended

I recommend fulfills its function

Something beautiful, heating without turning the Vape, so full convenience, the entire session is done with two heatings, I didn't expect such a gadget, applause for Vapefully! I really recommend!!!

I've had the chance to use the FMJ attachment for a month and I can honestly recommend it 100%. It makes using the Dynavap much easier, and combined with a water filter, it does a great job. With the attachment, just 2 heating cycles give you perfectly brown AVB. I especially recommend it for lazy users and more hardcore users due to the power boost and safety (I mean spinning the vape when it's thoroughly heated). My attachment was slightly too small to put on the cap, but you can just expand it with your hands at the cutout and then squeeze it tightly when putting it on. As for cleaning, it's the same as with a regular cap, just wipe it dry with paper. The price is quite controversial for a piece of copper, but in my opinion, the convenience of use is worth it. Cheers, buddy! :)

Super all you need is a piece of pipe and you can make it yourself hehe

With a clear conscience I RECOMMEND. The product works perfectly with an induction heater. True, the first heating takes a few seconds longer, but the effect in the form of vapor quality and taste is worth it. Clicer + VapCap M2021 + FMJ = Lots of vapor, great taste. In other words, what Tigers like the most.

The greatest advantage is that you don't have to use a vape pen. I managed to vape everything in one heating a few times. It's not a must-have, but it really works.

At first, I was very curious if the accessory would change anything, but I ordered it and I'm satisfied! It seems like a tiny piece of copper, but how much it changed the use of Dynavap M 2021 shocked me quite a bit. It perfectly retains heat, so you can get up to 5 super inhales without rushing, worrying that they won't come out. The first and second are a literal cumulus cloud filling half the room, better than Crafty in taste 10/10, admittedly you can feel a bit of warmth, but the flavor - oh, it's a masterpiece. The subsequent ones are also quite good. The material doesn't burn and isn't dry at the end of the session, so this kept me convinced that Dynavap was, and still is, the best, and accessories like FMJ give even more vaporization pleasure 👌

I bought it out of curiosity and I'm surprised how much it facilitates usage. Thanks to slow heating and simultaneous cooling, you can take 2 long drags. One heating instead of two. It makes a difference! 🙂

Super water filtration gadget. 👍👍👍

You can say that FMJ is "just" a copper sleeve. You can also say that 65 PLN for such a product is a very steep price. However, this does not change the fact that although simple, this product is brilliant in its simplicity! Putting the FMJ on the Captive Cap is very simple. Just align the Simrell logo with the DynaVap logo and put it on. In my case, this caused the Captive Cap to fall - here pliers were very helpful, as I was unable to squeeze the copper with my fingers alone enough to gently deform the whole thing. After this minor adjustment, the cap sits stable again! FMJ makes using the VapCap even simpler. You no longer need to rotate the vaporizer to distribute heat evenly - just aim the lighter flame at the Simrell logo, heat for a few more seconds after the second click and... Done! VapCap M 2021 with FMJ produces large amounts of vapor and already with the first inhale extracts everything best from the herbs. So far, I couldn't achieve equally amazing effects with just the VapCap, so the amount of vapor was a big, very pleasant surprise for me :) It's also worth noting that you don't have to rush with inhaling anymore. FMJ maintains temperature much longer than the Captive Cap itself, thanks to which you can take two calm, long inhales before hearing the clicks indicating a temperature drop inside the chamber. From my tests, a fully loaded VapCap M 2021 with FMJ can be heated twice before most of the herb components are vaporized. Considering how economical the VapCap is - this is a very good result. Again - the amount of vapor generated in both inhalations is so large that I decided to use the device with the irreplaceable SmokeBuddy ;) To summarize, I'm delighted. 65 PLN for a thin copper sheet seems to be a very steep price, but we get a proven product whose production required many tests (including material selection, diameter fitting, FMJ wall thickness tests) and really performs its task well. For me, it turned out to be a true game-changer. Highly recommended!

I'm testing it for the second day and I already have an opinion, perfect for bongs and other such equipment because you don't need to remove and rotate during heating. Using it traditionally, I have the impression that without FMJ I'm able to extract more from the charging because I can control it better at lower temperatures.