The Rogue 2 by Healthy Rips is a powerful session vaporizer with a titanium chamber and predominantly convection heating, the successor to the Rogue SE. Below you will find the complete user manual for Rogue 2, prepared by VapeFully as part of our user manuals library. It guides you from charging and sterilisation, through the settings, to cleaning and typical problems.
What’s in the box
- Rogue 2 vaporizer,
- USB-C charging cable,
- two mouthpieces: a short black 3D one and a longer straight glass one,
- dosing capsule,
- smell-reducing cap,
- tweezers, a chamber brush and a herb tool.
First use
- Connect the Rogue 2 with the USB-C cable and charge for 2 hours, until the indicator shows a full charge.
- Take off the plastic mouthpiece, remove the black gasket and the screen.
- Soak the screen in isopropyl alcohol (ISO), wash the gasket in warm water with washing-up liquid, and wipe the inside of the mouthpiece with an ISO-soaked swab. Avoid direct contact between alcohol and plastic.
- Wipe the heating chamber with a lightly ISO-soaked swab, holding the device upside down.
- After reassembly, run a sterilisation: set the maximum temperature and burn the empty chamber for about 20 minutes, until no worrying smell comes out.
Step-by-step operation
- Fill the chamber with medium-ground herb and barely tamp it at all. The Rogue 2 heats mainly by convection, so air needs to flow freely.
- Fit the mouthpiece and turn the device on with three quick presses of the main button.
- Set the temperature with the “+” and “-” buttons. The available range is 138-221°C; around 200°C is a good starting point.
- Take long draws. They can be faster or slower, harder or softer, but they need to be long. If the effects are too weak, raise the temperature.
- After the session, let the device cool down and empty the chamber of the used herb.
Useful combinations: change the temperature unit (°C/°F) by holding the power button together with “-” for 2 seconds. Flip the display by holding the power button for 3 seconds. Set the session length by holding the power button and “+”, then adjusting with “+” and “-“. The device switches off automatically after 4 or 6 minutes to avoid overheating.
The general rules of draw technique are covered in more detail in our guide on how to use a vaporizer correctly.
| Parameter | Value |
|---|---|
| Heating system | hybrid with convection dominance, titanium chamber |
| Temperature range | 138-221°C |
| Heat-up time | approx. 20-25 seconds |
| Battery | built-in lithium-polymer 3000 mAh, approx. 60-70 minutes of use |
| Charging | USB-C, 5V/2A, pass-through (usable while charging once above min. 20%) |
| Chamber capacity | approx. 0.25 g |
| Automatic shut-off | after 4/6 minutes |
The Rogue 2 also vaporizes concentrates: place cleaned hemp fibre with a small amount of concentrate in the chamber and set the maximum temperature.
Cleaning and maintenance
After every inhalation, brush the screen above the chamber so it does not clog. A blocked screen worsens the airflow and the performance of the whole device. Only use the brush once the chamber has cooled completely.
For a full clean, remove the mouthpiece, clean the chamber with an alcohol swab and soak the metal screen in ISO. Do not soak the glass mouthpiece in alcohol; just wipe it on the outside and inside. The dosing capsule from the kit significantly reduces chamber residue, so use it if you want to clean less often.
Most common problems (Rogue 2)
Protect / E08 error on the display
This is a protection error. Turn the device off and on, check the battery charge and let the hardware cool down after a series of intense sessions. If E08 keeps coming back despite a charged battery and a rest, it is a genuine fault and grounds for a warranty claim.
Little vapour or growing draw resistance
Check the screen above the chamber: it is the first part to clog. Also verify the pack (medium grind, herb barely tamped) and lengthen your draws. If the vapour does not return after a full clean and correct technique, send the device in for service.
Vapour is too warm
With the stock mouthpieces and a full chamber, the vapour gets warm towards the end of longer inhalations. Fit the cooling 3D mouthpiece from the kit or buy a longer cooling glass. The Rogue 2 also works with water adapters and bubblers.
Smell escapes despite the cap
The cap reduces smell from the mouthpiece side, but when carrying a loaded device some smell can escape from the bottom. That is a design trait, not a defect. When out and about, pack the chamber on the spot or carry your herb separately in an airtight container.
Warranty
A Rogue 2 bought at VapeFully is covered by the shop’s 24-month liability for conformity: you report a fault directly to us with your order number. The manufacturer Healthy Rips additionally runs its own programme: one year of free replacement and a one-time lifetime replacement at half price for failures not caused by the user (physical damage and liquid damage are excluded). You can also return an unused device within 30 days. The claim procedure is described on the Returns and complaints page.
FAQ
How do I turn on the Rogue 2?
Press the main button 3 times quickly. The device will heat up to the set temperature in about 20-25 seconds.
How do I switch the display from °F to °C?
Hold the power button and “-” at the same time for 2 seconds. The display will switch the temperature unit.
Can I use the Rogue 2 while charging?
Yes, the Rogue 2 has a pass-through function. Just wait until the battery charges to a minimum of 20%, and you can continue your session on the cable.
What temperature should I set on the Rogue 2 to begin with?
Start at around 200°C and raise it gradually if you want denser vapour. The full range is 138-221°C.
How long does the battery last in the Rogue 2?
The built-in 3000 mAh lithium-polymer battery lasts around 60-70 minutes of use, depending on temperature. Charging is via USB-C at 5V/2A.
Spare parts and accessories for Rogue 2
The Rogue 2 itself is no longer available for sale in our shop, but we do stock this accessory:
- ROGUE 2 – Protective Cover (€23.50)
The Rogue 2 is intended solely for dry herb and concentrates for aromatherapy, for adults (18+) only. Keep the device out of reach of children and animals and avoid exposing it to the elements. Pregnant women, breastfeeding mothers and people with health conditions should consult a doctor before use.
(4.7/5)