Fury 3 is a small, powerful portable dry herb vaporizer from Healthy Rips, with a titanium chamber and fast heat-up. This is the complete user manual for Fury 3, prepared by VapeFully based on the manufacturer’s materials. It takes you from the first charge, through temperature settings, to cleaning and the most common problems. More guides for other devices are in our user manuals hub.
What’s in the box
Inside the box with the Fury 3 vaporizer you will find, among other items:
- the Fury 3 vaporizer,
- a plastic mouthpiece,
- a black gasket with a screen,
- a USB-C cable.
First use
Before you pack the first chamber, charge the device fully and run an empty burn-off. This removes factory residue from the heating chamber.
- Connect the Fury 3 to power with the USB-C cable and charge it for 2 hours, until the battery indicator shows a full charge.
- Remove the plastic mouthpiece, take out the black gasket and the screen, then wipe the heating chamber with a cotton bud soaked in isopropyl alcohol. Hold the device upside down so that excess alcohol does not run inside.
- Switch the vaporizer on and set the maximum temperature to evaporate any remaining alcohol.
- Run the burn-off with an empty chamber for about 20 minutes, or until the device stops giving off any unpleasant smell.
Step-by-step operation
The Fury 3 vaporizes dry herbs and concentrates across a temperature range of 138-221°C. Operation relies on one main button and two adjustment buttons. The general rules of inhalation technique are described in our guide on how to use a vaporizer correctly.
- Fill the chamber with medium-ground herb. Do not pack it down, just arrange it so it fills the chamber snugly, because compacted herb restricts the airflow.
- Fit the mouthpiece and switch the Fury 3 on by pressing the main button five times.
- Set the temperature with the “+” and “-” buttons. Start from a lower value and raise it gradually if you want more vapour.
- Wait until the heater reaches the set temperature, then take long, slow draws. The longer the draw, the more active compounds you extract from the herb.
- After the session, let the device cool down, then empty the chamber of the spent herb.
The Fury 3 switches itself off automatically after 4 to 6 minutes to avoid overheating. You can switch it back on and finish the session. To adjust the session length, hold the power button together with “+”, then set the time with the “+” and “-” buttons.
Changing the temperature unit and technical data
To switch the display between °C and °F, hold the power button and “-” together for 2 seconds. To rotate the screen, hold the power button alone for 3 seconds.
| Parameter | Value |
|---|---|
| Temperature range | 138-221°C |
| Battery | lithium polymer 2300 mAh (built in) |
| Charging | USB-C, 5V / 1.5A, about 2 hours |
| Use while charging | yes, once charged to at least 20% |
| Automatic shut-off | after 4 to 6 minutes |
Cleaning and maintenance
After each session, brush the screen above the chamber with a cleaning brush so it does not clog. A blocked screen ruins the airflow and makes the device perform worse. This one habit saves you more frequent, heavier cleaning.
For a thorough clean, remove the mouthpiece, then take out the black gasket and the screen. Soak the screen in isopropyl alcohol and wash the gasket in warm water with washing-up liquid. Wipe the heating chamber with a cotton bud soaked in alcohol, holding the device upside down.
Do not soak the plastic mouthpiece in alcohol, because the material reacts to it. Wipe the inside of the mouthpiece with a cotton bud, keeping the alcohol away from direct contact with the plastic. Dosing capsules keep the inside of the device cleaner and speed up loading and emptying the chamber.
Most common problems (Fury 3)
Restricted draw and little vapour
Check the screen above the chamber, because it clogs with resin quickly, sometimes after just three sessions. Brush it clean and loosen the load if the herb is packed too tight. Take longer draws and raise the temperature by a few degrees if you are still getting too little vapour.
Herb particles on the heater and worse flavour
The screen holes are relatively large, so without a capsule fine herb particles can reach the heater and spoil the flavour of the vapour. Load the chamber with a dosing capsule, and sieve very finely ground herb or grind it a little coarser. Clean the chamber and the screen of residue regularly.
Battery life getting shorter
The Fury 3 battery is built in and non-replaceable, and its capacity drops over time. Fully charged, it should last a whole day even with heavy use. If a new device dies after a few minutes, report it as a warranty claim.
When it’s a case for the service centre
Faults with the electronics, charging or the heater cannot be repaired at home. Contact us and describe when the problem occurs. Bear in mind that since 2026 Healthy Rips has suspended shipments to Europe, so manufacturer servicing can be slower than usual.
Warranty
The Fury 3 is covered by a 2-year shop warranty, and the manufacturer Healthy Rips adds one year of free replacement plus a lifetime half-price replacement for faults not caused by the user. Mechanical damage and liquid damage are excluded from the warranty, and since 2026 the brand has been hard to source in Europe, so manufacturer servicing can take longer. You have 30 days to return the product. The full claims and returns procedure is on our Returns and complaints page.
FAQ
How do I switch the Fury 3 vaporizer on?
Press the main button five times. The same button switches the device off.
What temperature range does the Fury 3 work in?
From 138 to 221°C. Lower values give gentler vapour and more flavour, higher values give more vapour.
How do I change the display from °F to °C?
Hold the power button and “-” together for 2 seconds. The display switches the temperature unit.
Can I use the Fury 3 while it’s charging?
Yes. The Fury 3 supports use while charging once the battery is charged to at least 20%.
How long should I charge the Fury 3 before first use?
For 2 hours, using the USB-C cable, until the battery indicator shows a full charge.
Spare parts and accessories for Fury 3
The Fury 3 itself is no longer available to buy, because the manufacturer has suspended shipments to Europe. Compatible parts are still in stock:
The Fury 3 is intended solely for dry herbs and aromatherapy, for adults aged 18 or over. Keep the device out of the reach of children. Pregnant women, breastfeeding mothers and people with chronic conditions should consult a doctor before use.
(4.7/5)