PAX 2/3 – Alternative chamber screen
PAX 3D Screen is a metal screen that you can install at the bottom of the chamber in PAX 2 and PAX 3 vaporizers in place of the stock screen. This accessory solves all the problems that you might encounter while using the original screen. The most important benefit is that it greatly improves the air circulation and – what follows – reduces the resistance when you draw vapor. This tool is manufactured in the USA by NewVape, a company that specializes in the production of high-quality spare accessories for vaporizers.
Eliminate all the problems
PAX 3D Screen is an element that helps you eliminate all the problems that many users have with the stock screen installed in PAX 2 and PAX 3 vaporizers. First of all, the original screen is slightly too large in relation to the size of the chamber, which makes it difficult to remove for cleaning and to place it back at the chamber bottom. Thanks to 3D Screen you can forget about these problems. If you want to remove the screen, all you need to do is open the chamber once you finish vaping. The screen and the herbs simply fall out. 3D Screen is thicker than the original screen, which makes it more durable and prevents it from bending. Above all, 3D Screen improves the air flow in the chamber. This way there is less resistance when you inhale and the vaping experience is more efficient. Well recommended!
Kamil Wasielka –
I do not know if this is “must have” in the case of PAX 3, but it certainly increases the comfort of using vaporizer a little.
The resistance when pulling is a little smaller, the clouds are a bit larger, and that was probably what it was.
The strainer is well made, it is easy to clean, it does not get stuck in the heating chamber (so it is loose so you have to be careful not to get lost).
Translated automatically from the VapeFully.pl store
I do not know if this is “must have” in the case of PAX 3, but it certainly increases the comfort of using vaporizer a little.
The resistance when pulling is a little smaller, the clouds are a bit larger, and that was probably what it was.
The strainer is well made, it is easy to clean, it does not get stuck in the heating chamber (so it is loose so you have to be careful not to get lost).
Translated automatically from the VapeFully.pl store
(0) (0) Watch Unwatch
Gregoryro –
Does 3D Screen not bend when I push it with a ramrod?
Does 3D Screen not bend when I push it with a ramrod?
(0) (0) Watch Unwatch
Lucas –
You don’t have to push the 3D Screen with a ramrod. Simply flip the vaporizer upside down and the screen will fall out on its own. As for bending – 3D Screen is very hard, and you can’t bend it with bare hands.
You don’t have to push the 3D Screen with a ramrod. Simply flip the vaporizer upside down and the screen will fall out on its own. As for bending – 3D Screen is very hard, and you can’t bend it with bare hands.
(0) (0)