You just bought your first Vaporizer and you’re wondering how to pack herbs in the chamber? Or maybe you’ve been vaporizing for a while now, but you want to improve the vapor quality and efficiency of your Vaporizer? Find out how to properly pack herbs in the chamber to achieve spectacular vapor clouds, and at the same time use smaller amounts of herbs!
What will you learn from this article?
👉 How to grind herbs for a Vaporizer?
👉 How to properly pack a Vaporizer?
👉 What humidity should dried herbs have to be ideal for vaporization?
Table of contents:
1. Proper grinding of herbs for vaporization
Proper grinding of herbs is the foundation of success. If the herbs before vaporization are poorly ground, which in most cases means – not fine enough, then the quality of inhalation will not be the best. It’s worth starting by equipping yourself with a good quality herb grinder, and then before each inhalation, spend some time properly grinding the vaporized herbs.
What does this exactly mean? It depends on the type of Vaporizer. In the case of convection Vaporizers, herbs cannot be ground too finely, as their small pieces can be blown away by the air stream and clog the filters located above the chamber.
If, on the other hand, you are using a conduction Vaporizer, the finer the herbs are ground, the better. This way the herbs will have a larger contact surface with the heating chamber and all the material will be heated evenly.
Additionally, it’s worth mentioning that the finer you grind the herbs for vaporization, the more of it will fit in the chamber – and as a result, your sessions will be longer and the clouds of vapor larger.
2. Proper packing of herbs into the Vaporizer chamber
Once you have ground the herbs to the ideal consistency and they are ready for inhalation, it’s time to pack them into the Vaporizer chamber. How to do it?
First, check reviews of Vaporizerreviewers. It’s also worth checking whether the manufacturer suggests anything in this regard in the instructions – some recommend filling the chamber completely and pressing the herbs firmly, while others recommend leaving a little space – so that the herbs still have a bit of “room”.
Nevertheless, in the case of most Vaporizers, the chamber should be filled completely and rather tightly. If there’s too little herbs, it won’t be heated evenly, which can negatively affect the quality of inhalation or the amount of vapor – in the case of conduction Vaporizers, too little herbs will mean worse heat conduction, while in convection models, the air will bypass the herbs instead of passing through them.
The type of Vaporizer determines how firmly the herbs in the chamber should be packed – in the case of convection, the herbs should not be packed, it’s enough if they fill the chamber tightly. Meanwhile, conduction models work better if the herbs have been slightly packed. Of course, you should never press the herbs “by force”.
3. Optimal moisture level of herbs for vaporization
Herbs cannot be excessively moist, nor excessively dry. Boveda sachets work perfectly, which care for the proper moisture level of the herbs. If the herbs are too moist, they can simply get moldy, and they also won’t produce visible vapor – at least until they completely dry out during inhalation.
However, if you want a larger amount of vapor, it’s worth going the other way – slightly over-dry the herbs. This will allow you to obtain the largest clouds of vapor, but be careful – the vapor may be slightly less smooth for the throat!
How to pack herbs in the vaporizer chamber? – Summary
The quality of inhalation is affected not only by the vaporizer itself or selected herbs, but also by many other elements – such as proper grinding of herbs or the way they are packed in the vaporizer chamber.
In any case, you should pack herbs with a sense of touch, but also not too tightly. Thanks to this, the vapor from the vaporizer will be dense and full of aroma, and you will enjoy excellent inhalation!
(4.7/5)